Engineered to transform traditional wiring into a streamlined high-performance installation solution.

NO MORE MANUAL WIRING TO:

Lights | Switches | Fans | Smoke detectors

Why P-HUB over traditional Building Wiring Methods?

  • Save
    60%  on-site Labour Time for cable
    installations
  • Save
    100% on-site Labour Time for incorrect wiring fault finding.

  • Save
    100% on Materials for Cable and Wiring off-cuts
  • Save
    90% on-site Labour Time for wire terminal connections
1 4

Traditional wiring vs P-HUB

  • Traditional Wiring

  • P-HUB Engineered Solution

  • Traditional Wiring

  • P-HUB Engineered Solution (same circuits)

  • Traditional Result

  • P-HUB Engineered Solution

  • Traditional Wiring

  • P-HUB Engineered Solution

  • Traditional Wiring

  • P-HUB Engineered Solution

  • Traditional Wiring

  • P-HUB Engineered Solution

Engineered for drability, repeatability, and clean commissioning on high-density sites

  • Plug and play Harness architecture

    Pre-engineered hub + Harnesses for Lighting, switches, fans & smoke Alarm.

    Built for Repeated Typologies

  • Faster install, fewer touchpoints

    Reduce on-site terminations and rework by shifting assembly off site.

    Less congestion in ceilings and walls

  • Compliance first approach

    Documentation to support design review and commissioning (e.g., AS/NZS 3000 alignment)

    Traceable Test & Inspect Pathway

  • Factory testing & Traceability

    Harness IDs & QA records support faster fault isolation and handover clarity.

    Cleaner commissioning packs

  • Future-ready & Adaptable

    Supports Smart control strategies and upgrades with minimal disruption.

    Subject to Project selections/approvals

  • Safer Crews, cleaner sites

    * Less on-site wiring congestion

    * Fewer loose joins and exposed Conductors

    * Cleaner, safer work zones

    * Pre-site manufactured and tested wire harnesses

    Better quality control

1 6

How it Works

A repeatable process thats easy to coordinate during design/VE and simple to roll out accross multiple floors

Design Coordination

Confirm typical apartment Typologies, circuit architecture, device schedule, and hub locations

Off-Site Manufacture

Harnesses are manufactured for Plug and Play installation

Rapid installation

Install hubs and connect harnesses for devices and switches

Simplified Commissioning

Traceability supports testing, fault isolation, and cleaner handover documentation

Built for people who protect margin

P-HUB is designed to work with the Entire Project Team - especially where repetion creates leverage

  • Developers

    Reduce programme risk and support repeatable delivery across towers

  • Builders / D&C

    Improve buildability, reduce defects, and simplify staging.

  • Electrical Contractors

    Fewer terminations, cleaner rough-in, clearer commissioning packs.

  • Consultants / Certifiers

    Traceability + defined architecture supports compliance review.

1 4

FAQs

What Is the P-HUB System?

A modular electrical wiring planform that uses a central hub
as a star-point for pre-wired harnesses, replacing much of traditional
point-to-point wiring for typical room-to-room circuits.

Does it replace the switchboard?

NO - The P-HUB System is NOT a protection device – it is a
distribution hub.

Is it suitable for high-rise apartments?

YES - especially where typologies repeat (1BR/2BR/3BR stacks), enabling consistent installations and scalable Quality Assurance.

Can it work with smart switches and sensors?

YES - compatible with smart control strategies and future
upgrades, subject to project-specific selections and approvals.

How do approvals and compliance work?

We provide drawings, circuit architecture, harness
schedules, and a compliance/test approach to support certifiers, builders, and
electrical contractors through review and commissioning.

Where does it fit in the project lifecycle?

Early - during design/VE and coordination. Once typologies
and device schedules are confirmed (typically lights, fans, switches),
harnesses can be manufactured off-site to support rapid installation.

Is it approved by the Australian Electrical Industry?

YES - designed and manufactured to AS/NZS 3000 and AS/NZS 61535:2011.

The P-HUB Story

Watch the video here

Request a Free Demo + project fit check

Tell us your project stage and typical apartment mix.

We'll respond with a recommended pilot scope and the documentation you need for your team

Send enquiry
+61 7 5650 0548+61 408 06001

Or Call us directly